Eliminate Fuel Pilferage with Precision Telematics
Replace unreliable float gauges with Solid-State Capacitive Sensors. Achieve 99.5% accuracy in fuel auditing, detect micro-siphoning events, and integrate seamlessly with your existing ERP.
99.5%
Accuracy
<1 sec
Latency
IP69K
Protection
Why Resistive Float Sensors Fail
Most OEM truck sensors are built for estimation, not auditing. The difference is in the physics.
Where is Your Fuel Money Going?
💰 The ROI Equation
Saving just 5 Liters/Day on a single truck = ₹15,000/Month in pure profit. The Alphatech system typically pays for itself in less than 45 days.
Micro-Siphoning Detection Logic
Our proprietary algorithm distinguishes between "Road Slosh" (fuel moving due to bumps) and "Actual Drainage."
⚡ Immediate Push Notifications
Get an alert within 30 seconds if fuel drops >2% while ignition is OFF.
📍 Geo-Tagged Theft Events
Exact Google Maps coordinates of where the theft occurred.
⛽ Refill Auditing
Verify petrol pump bills. If the bill says 100L but sensor detects 92L, you know instantly.
Ready to Audit Your Fleet?
Stop estimating. Start measuring. Deploy Alphatech on a single truck and watch the savings prove the concept.
Technical Support Available Mon-Sat | Pan-India Installation Network
Frequently Asked Questions
Can this system detect fuel theft when the truck is parked?
Yes. Our sensors are active 24/7. If the fuel level drops by more than 2% while the ignition is OFF, the system identifies it as a "Theft Event" and immediately sends an alert to your phone and the control room.
Do I need to drill a hole in the fuel tank?
Yes, for the Wired Capacitive Sensor, a small, precise hole is drilled to insert the rod. We use industrial sealants to ensure zero leakage. For clients who do not want drilling, we recommend our Ultrasonic or Paste-on sensor options (though Rod sensors offer highest accuracy).
Does it work with my existing GPS device?
Alphatech sensors communicate via RS232, RS485, and Analog protocols. They are compatible with most major commercial GPS brands like Teltonika, Ruptela, and Concox. If you have a basic Chinese tracker, you may need to upgrade to our MCU unit for fuel data support.
What is the accuracy difference between Float vs. Capacitive?
Standard resistive float sensors (that come with the truck) have a margin of error of 5-10% and have "blind spots" at the top and bottom of the tank. Alphatech's Capacitive Rods have an accuracy of 99.5% (margin of error <0.5%) and measure the full depth of the tank.
